Circuit Board Cutting Operation Specifications And Precautions

1. Operating Specifications

1. Check the set size before starting the automatic feeding machine to prevent the wrong material from being opened.

2. After the inner layer board is cut, pay attention to mark the horizontal and straight materials separately, and do not mix them up.

3. Gloves should be worn when handling the board, and it should be handled with care to prevent scratching the board surface.

4. After washing the board, it is necessary to pay attention to whether there is any water stain on the board surface. It is forbidden to bake the board with water stain to prevent oxidation.

5. Check the temperature setting before starting the oven.

2. Safety and environmental precautions:

1. When the cutting machine is turned on, do not put your hands into the machine.

2. Do not put flammable materials such as paper skins next to the oven to prevent fires.

3. The oven temperature setting is strictly prohibited to exceed the specified value.

4. Asbestos gloves should be worn when taking out the plate from the oven, and the plate should be cooled down before taking out the plate.

5. Dispose of waste materials in strict accordance with the methods specified in MEI001 to prevent environmental pollution.